Difference between Math.Floor() and Math.Truncate()

Math.Floor rounds down, Math.Ceiling rounds up, and Math.Truncate rounds towards zero. Thus, Math.Truncate is like Math.Floor for positive numbers, and like Math.Ceiling for negative numbers. Here's the reference.

For completeness, Math.Round rounds to the nearest integer. If the number is exactly midway between two integers, then it rounds towards the even one. Reference.

See also: Pax Diablo's answer. Highly recommended!

Follow these links for the MSDN descriptions of:

• Math.Floor, which rounds down towards negative infinity.
• Math.Ceiling, which rounds up towards positive infinity.
• Math.Truncate, which rounds up or down towards zero.
• Math.Round, which rounds to the nearest integer or specified number of decimal places. You can specify the behavior if it's exactly equidistant between two possibilities, such as rounding so that the final digit is even ("Round(2.5,MidpointRounding.ToEven)" becoming 2) or so that it's further away from zero ("Round(2.5,MidpointRounding.AwayFromZero)" becoming 3).

The following diagram and table may help:

-3        -2        -1         0         1         2         3
 +--|------+---------+----|----+--|------+----|----+-------|-+
    a                     b       c           d            e

                       a=-2.7  b=-0.5  c=0.3  d=1.5  e=2.8
                       ======  ======  =====  =====  =====
Floor                    -3      -1      0      1      2
Ceiling                  -2       0      1      2      3
Truncate                 -2       0      0      1      2
Round (ToEven)           -3       0      0      2      3
Round (AwayFromZero)     -3      -1      0      2      3

Note that Round is a lot more powerful than it seems, simply because it can round to a specific number of decimal places. All the others round to zero decimals always. For example:

n = 3.145;
a = System.Math.Round (n, 2, MidpointRounding.ToEven);       // 3.14
b = System.Math.Round (n, 2, MidpointRounding.AwayFromZero); // 3.15

With the other functions, you have to use multiply/divide trickery to achieve the same effect:

c = System.Math.Truncate (n * 100) / 100;                    // 3.14
d = System.Math.Ceiling (n * 100) / 100;                     // 3.15

Math.Floor() rounds toward negative infinity

Math.Truncate rounds up or down towards zero.

For example:

Math.Floor(-3.4)     = -4
Math.Truncate(-3.4)  = -3

while

Math.Floor(3.4)     = 3
Math.Truncate(3.4)  = 3

Math.floor sliiiide to the left...
Math.ceil sliiiide to the right...
Math.truncate criiiiss crooooss (floor/ceil always towards 0)
Math.round cha cha, real smooth... (go to closest side)

Let's go to work! (⌐□_□)

To the left... Math.floor
Take it back now y'all... --
Two hops this time... -=2

Everybody clap your hands ✋✋

How low can you go? Can you go down low? All the way to the floor?

if (this == "wrong")
    return "i don't wanna be right";

Math.truncate(x) is also the same as int(x).
by removing a positive or negative fraction, you're always heading towards 0.

Some examples:

Round(1.5) = 2
Round(2.5) = 2
Round(1.5, MidpointRounding.AwayFromZero) = 2
Round(2.5, MidpointRounding.AwayFromZero) = 3
Round(1.55, 1) = 1.6
Round(1.65, 1) = 1.6
Round(1.55, 1, MidpointRounding.AwayFromZero) = 1.6
Round(1.65, 1, MidpointRounding.AwayFromZero) = 1.7

Truncate(2.10) = 2
Truncate(2.00) = 2
Truncate(1.90) = 1
Truncate(1.80) = 1

They are functionally equivalent with positive numbers. The difference is in how they handle negative numbers.

For example:

Math.Floor(2.5) = 2
Math.Truncate(2.5) = 2

Math.Floor(-2.5) = -3
Math.Truncate(-2.5) = -2

MSDN links: - Math.Floor Method - Math.Truncate Method

P.S. Beware of Math.Round it may not be what you expect.

To get the "standard" rounding result use:

float myFloat = 4.5;
Console.WriteLine( Math.Round(myFloat) ); // writes 4
Console.WriteLine( Math.Round(myFloat, 0, MidpointRounding.AwayFromZero) ) //writes 5
Console.WriteLine( myFloat.ToString("F0") ); // writes 5

Try this, Examples:

Math.Floor() vs Math.Truncate()

Math.Floor(2.56) = 2
Math.Floor(3.22) = 3
Math.Floor(-2.56) = -3
Math.Floor(-3.26) = -4

Math.Truncate(2.56) = 2
Math.Truncate(2.00) = 2
Math.Truncate(1.20) = 1
Math.Truncate(-3.26) = -3
Math.Truncate(-3.96) = -3

Also Math.Round()

   Math.Round(1.6) = 2
   Math.Round(-8.56) = -9
   Math.Round(8.16) = 8
   Math.Round(8.50) = 8
   Math.Round(8.51) = 9

math.floor()

Returns the largest integer less than or equal to the specified number. MSDN system.math.floor

math.truncate()

Calculates the integral part of a number. MSDN system.math.truncate

Math.Floor() rounds "toward negative infinity" in compliance to IEEE Standard 754 section 4.

Math.Truncate() rounds " to the nearest integer towards zero."

Math.Floor(): Returns the largest integer less than or equal to the specified double-precision floating-point number.

Math.Round(): Rounds a value to the nearest integer or to the specified number of fractional digits.

Math.floor() will always round down ie., it returns LESSER integer. While round() will return the NEAREST integer

math.floor()

Returns the largest integer less than or equal to the specified number.

math.truncate()

Calculates the integral part of a number.

Math.Floor() :

It gives the largest integer less than or equal to the given number.

    Math.Floor(3.45) =3
    Math.Floor(-3.45) =-4

Math.Truncate():

It removes the decimal places of the number and replace with zero

Math.Truncate(3.45)=3
 Math.Truncate(-3.45)=-3

Also from above examples we can see that floor and truncate are same for positive numbers.

In .NET, both Math.Floor() and Math.Truncate() are mathematical functions used to round down a decimal number to the nearest integer. However, there is a subtle difference between the two:

1: Math.Floor():

Math.Floor() always rounds down the decimal number to the nearest integer towards negative infinity. It returns the largest integer less than or equal to the specified number. For positive numbers, Math.Floor() rounds down to the immediate lower integer. For negative numbers, Math.Floor() rounds down to the next lower integer (further away from zero).

Example:

Math.Floor(3.8) will result in 3.

Math.Floor(-3.8) will result in -4.

2: Math.Truncate():

Math.Truncate() also rounds down the decimal number to the nearest integer, but it does so towards zero. It removes the fractional part without performing rounding. For positive numbers, Math.Truncate() behaves the same way as Math.Floor(). For negative numbers, Math.Truncate() rounds towards zero, so the result is closer to zero.

Example:

Math.Truncate(3.8) will result in 3.

Math.Truncate(-3.8) will result in -3.

Truncate drops the decimal point.

Going by the Mathematical Definition of Floor, that is, "Greatest integer less than or equal to a number", This is completely unambiguous, whereas, Truncate just removes the fractional part, which is equivalent to round towards 0.