Return to Question

Fixed spelling, syntax highlighting.

Source Link

edited Jul 8, 2019 at 1:45

2.5k
19
28
31

My UnuUno WiFi Rev2 outputs on the serial monitor after ~30 min "no socket available". Until that point everything wirksworks just fine, my requests run as expected. I use the .flush() and .stop() commands, as in several forums suggested. In the following my really messy code (sorry for that, but it's not optimized and only for testing some stuff):

#include <SPI.h>

#include <WiFiNINA.h>

//W-Lan Data
int status = WL_IDLE_STATUS;
char ssid[] = "**********";
char pass[] = "**********";

bool jsonBool;
char jsonChar;
int curlyBracket;
String jsonCode;
String json;

IPAddress HueBridge(10, 0, 0, 30);

WiFiClient WHTTP;

void setup() {
  while (status != WL_CONNECTED) {
    status = WiFi.begin(ssid, pass);
    delay(500);
  }
}

void loop() {
  jsonProcessing();
  httpRequest();

  bar1();

  delay(55);
}

void httpRequest() {
  WHTTP.flush();
  WHTTP.stop();
  if(WHTTP.connect(HueBridge, 80)) {
    WHTTP.println("GET /api/*************/lights/ HTTP/1.1");
    WHTTP.println("Host: 10.0.0.30");
    WHTTP.println("Connection: close");
    WHTTP.println();
  }
}

void jsonProcessing() {
  while(WHTTP.connected()) {
    if(WHTTP.available()) {
      curlyBracket = 7;
      while(WHTTP.available()) {
        jsonChar = WHTTP.read();
        if((jsonChar == '{') && (curlyBracket == 7)) {
          jsonBool = true;
          curlyBracket = 0;
        }
        if(jsonChar == '}') {
          jsonBool = false;
          jsonCode = jsonCode + '}';
          curlyBracket++;
        }
        if(jsonBool) {
          jsonCode = jsonCode + jsonChar;
        }
      }
    }
    WHTTP.flush();
    WHTTP.stop();
  }
  jsonBool = false;

  //processing jsonCode variable

  jsonCode = "";
}

void bar1() {
  //calculating stuff
}

#include <SPI.h>
#include <WiFiNINA.h>

//W-Lan Data
int status = WL_IDLE_STATUS;
char ssid[] = "**********";
char pass[] = "**********";

bool jsonBool;
char jsonChar;
int curlyBracket;
String jsonCode;
String json;

IPAddress HueBridge(10, 0, 0, 30);

WiFiClient WHTTP;

void setup() {
  while (status != WL_CONNECTED) {
    status = WiFi.begin(ssid, pass);
    delay(500);
  }
}

void loop() {
  jsonProcessing();
  httpRequest();

  bar1();

  delay(55);
}

void httpRequest() {
  WHTTP.flush();
  WHTTP.stop();
  if(WHTTP.connect(HueBridge, 80)) {
    WHTTP.println("GET /api/*************/lights/ HTTP/1.1");
    WHTTP.println("Host: 10.0.0.30");
    WHTTP.println("Connection: close");
    WHTTP.println();
  }
}

void jsonProcessing() {
  while(WHTTP.connected()) {
    if(WHTTP.available()) {
      curlyBracket = 7;
      while(WHTTP.available()) {
        jsonChar = WHTTP.read();
        if((jsonChar == '{') && (curlyBracket == 7)) {
          jsonBool = true;
          curlyBracket = 0;
        }
        if(jsonChar == '}') {
          jsonBool = false;
          jsonCode = jsonCode + '}';
          curlyBracket++;
        }
        if(jsonBool) {
          jsonCode = jsonCode + jsonChar;
        }
      }
    }
    WHTTP.flush();
    WHTTP.stop();
  }
  jsonBool = false;

  //processing jsonCode variable

  jsonCode = "";
}

void bar1() {
  //calculating stuff
}

The main structure istis copied from here https://www.arduino.cc/en/Tutorial/WiFiNINAWiFiWebClientRepeating so it theoretically should work.

My Unu WiFi Rev2 outputs on the serial monitor after ~30 min "no socket available". Until that point everything wirks just fine, my requests run as expected. I use the .flush() and .stop() commands, as in several forums suggested. In the following my really messy code (sorry for that, but it's not optimized and only for testing some stuff):

#include <SPI.h>

#include <WiFiNINA.h>

//W-Lan Data
int status = WL_IDLE_STATUS;
char ssid[] = "**********";
char pass[] = "**********";

bool jsonBool;
char jsonChar;
int curlyBracket;
String jsonCode;
String json;

IPAddress HueBridge(10, 0, 0, 30);

WiFiClient WHTTP;

void setup() {
  while (status != WL_CONNECTED) {
    status = WiFi.begin(ssid, pass);
    delay(500);
  }
}

void loop() {
  jsonProcessing();
  httpRequest();

  bar1();

  delay(55);
}

void httpRequest() {
  WHTTP.flush();
  WHTTP.stop();
  if(WHTTP.connect(HueBridge, 80)) {
    WHTTP.println("GET /api/*************/lights/ HTTP/1.1");
    WHTTP.println("Host: 10.0.0.30");
    WHTTP.println("Connection: close");
    WHTTP.println();
  }
}

void jsonProcessing() {
  while(WHTTP.connected()) {
    if(WHTTP.available()) {
      curlyBracket = 7;
      while(WHTTP.available()) {
        jsonChar = WHTTP.read();
        if((jsonChar == '{') && (curlyBracket == 7)) {
          jsonBool = true;
          curlyBracket = 0;
        }
        if(jsonChar == '}') {
          jsonBool = false;
          jsonCode = jsonCode + '}';
          curlyBracket++;
        }
        if(jsonBool) {
          jsonCode = jsonCode + jsonChar;
        }
      }
    }
    WHTTP.flush();
    WHTTP.stop();
  }
  jsonBool = false;

  //processing jsonCode variable

  jsonCode = "";
}

void bar1() {
  //calculating stuff
}

The main structure ist copied from here https://www.arduino.cc/en/Tutorial/WiFiNINAWiFiWebClientRepeating so it theoretically should work.

My Uno WiFi Rev2 outputs on the serial monitor after ~30 min "no socket available". Until that point everything works just fine, my requests run as expected. I use the .flush() and .stop() commands, as in several forums suggested. In the following my really messy code (sorry for that, but it's not optimized and only for testing some stuff):

#include <SPI.h>
#include <WiFiNINA.h>

//W-Lan Data
int status = WL_IDLE_STATUS;
char ssid[] = "**********";
char pass[] = "**********";

bool jsonBool;
char jsonChar;
int curlyBracket;
String jsonCode;
String json;

IPAddress HueBridge(10, 0, 0, 30);

WiFiClient WHTTP;

void setup() {
  while (status != WL_CONNECTED) {
    status = WiFi.begin(ssid, pass);
    delay(500);
  }
}

void loop() {
  jsonProcessing();
  httpRequest();

  bar1();

  delay(55);
}

void httpRequest() {
  WHTTP.flush();
  WHTTP.stop();
  if(WHTTP.connect(HueBridge, 80)) {
    WHTTP.println("GET /api/*************/lights/ HTTP/1.1");
    WHTTP.println("Host: 10.0.0.30");
    WHTTP.println("Connection: close");
    WHTTP.println();
  }
}

void jsonProcessing() {
  while(WHTTP.connected()) {
    if(WHTTP.available()) {
      curlyBracket = 7;
      while(WHTTP.available()) {
        jsonChar = WHTTP.read();
        if((jsonChar == '{') && (curlyBracket == 7)) {
          jsonBool = true;
          curlyBracket = 0;
        }
        if(jsonChar == '}') {
          jsonBool = false;
          jsonCode = jsonCode + '}';
          curlyBracket++;
        }
        if(jsonBool) {
          jsonCode = jsonCode + jsonChar;
        }
      }
    }
    WHTTP.flush();
    WHTTP.stop();
  }
  jsonBool = false;

  //processing jsonCode variable

  jsonCode = "";
}

void bar1() {
  //calculating stuff
}

The main structure is copied from here https://www.arduino.cc/en/Tutorial/WiFiNINAWiFiWebClientRepeating so it theoretically should work.

Source Link

asked Jul 8, 2019 at 0:23

mannaris

Arduino Uno WiFi Rev2 "no socket available"

#include <SPI.h>

#include <WiFiNINA.h>

//W-Lan Data
int status = WL_IDLE_STATUS;
char ssid[] = "**********";
char pass[] = "**********";

bool jsonBool;
char jsonChar;
int curlyBracket;
String jsonCode;
String json;

IPAddress HueBridge(10, 0, 0, 30);

WiFiClient WHTTP;

void setup() {
  while (status != WL_CONNECTED) {
    status = WiFi.begin(ssid, pass);
    delay(500);
  }
}

void loop() {
  jsonProcessing();
  httpRequest();

  bar1();

  delay(55);
}

void httpRequest() {
  WHTTP.flush();
  WHTTP.stop();
  if(WHTTP.connect(HueBridge, 80)) {
    WHTTP.println("GET /api/*************/lights/ HTTP/1.1");
    WHTTP.println("Host: 10.0.0.30");
    WHTTP.println("Connection: close");
    WHTTP.println();
  }
}

void jsonProcessing() {
  while(WHTTP.connected()) {
    if(WHTTP.available()) {
      curlyBracket = 7;
      while(WHTTP.available()) {
        jsonChar = WHTTP.read();
        if((jsonChar == '{') && (curlyBracket == 7)) {
          jsonBool = true;
          curlyBracket = 0;
        }
        if(jsonChar == '}') {
          jsonBool = false;
          jsonCode = jsonCode + '}';
          curlyBracket++;
        }
        if(jsonBool) {
          jsonCode = jsonCode + jsonChar;
        }
      }
    }
    WHTTP.flush();
    WHTTP.stop();
  }
  jsonBool = false;

  //processing jsonCode variable

  jsonCode = "";
}

void bar1() {
  //calculating stuff
}

If anything is unclear feel free to ask. This is not the whole code, just the WiFi relevant parts.

The main structure ist copied from here https://www.arduino.cc/en/Tutorial/WiFiNINAWiFiWebClientRepeating so it theoretically should work.

Thanks in advance.

arduino-uno-wifi